Help

Dead centres

No Filter Applied yet
Sort by:
  • Image

    Solid centres, Mount MK 2, DIN 806, full point, ground, with full carbide tip

    Image

    Solid centres, Mount MK 2, DIN 806, full point, ground, with full carbide tip

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • DIN 806, full point, ground
    • with full carbide tip

  • Image

    Solid centres, Mount MK 3, DIN 806, full point, ground, with full carbide tip

    Image

    Solid centres, Mount MK 3, DIN 806, full point, ground, with full carbide tip

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • DIN 806, full point, ground
    • with full carbide tip

  • Image

    Solid centres, Mount MK 5, DIN 806, full point, ground, with full carbide tip

    Image

    Solid centres, Mount MK 5, DIN 806, full point, ground, with full carbide tip

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • DIN 806, full point, ground
    • with full carbide tip

  • Image

    Solid centres, Mount MK 5, similar DIN 807, full point, with draw-off nut and SW, with extended centre point, material: tool steel

    Image

    Solid centres, Mount MK 5, similar DIN 807, full point, with draw-off nut and SW, with extended centre point, material: tool steel

    Full point, extended, with draw-off nut.

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • Similar DIN 807, full point with draw-off nut and SW, with extended centre point
    • material: tool steel

  • Image

    Solid centres, Mount MK 4, similar DIN 807, full point, with draw-off nut and SW, with extended centre point, material: tool steel

    Image

    Solid centres, Mount MK 4, similar DIN 807, full point, with draw-off nut and SW, with extended centre point, material: tool steel

    Full point, extended, with draw-off nut.

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • Similar DIN 807, full point with draw-off nut and SW, with extended centre point
    • material: tool steel

  • Image

    Solid centres, Mount MK 3, similar DIN 807, full point, with draw-off nut and SW, with extended centre point, material: tool steel

    Image

    Solid centres, Mount MK 3, similar DIN 807, full point, with draw-off nut and SW, with extended centre point, material: tool steel

    Full point, extended, with draw-off nut.

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • Similar DIN 807, full point with draw-off nut and SW, with extended centre point
    • material: tool steel

  • Image

    Solid centres, Mount MK 4, DIN 806, full point, ground, with full carbide tip

    Image

    Solid centres, Mount MK 4, DIN 806, full point, ground, with full carbide tip

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • DIN 806, full point, ground
    • with full carbide tip

  • Image

    Solid centres, Mount MK 6, similar DIN 807, full point, with draw-off nut and SW, with extended centre point, material: tool steel

    Image

    Solid centres, Mount MK 6, similar DIN 807, full point, with draw-off nut and SW, with extended centre point, material: tool steel

    Full point, extended, with draw-off nut.

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • Similar DIN 807, full point with draw-off nut and SW, with extended centre point
    • material: tool steel

  • Image

    Solid centres, Mount MK 5, DIN 806, half point, ground, with carbide insert

    Image

    Solid centres, Mount MK 5, DIN 806, half point, ground, with carbide insert

    Half point, with carbide insert.

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • DIN 806, half point, ground
    • With carbide insert

  • Image

    Solid centres, Mount MK 2, DIN 806, half point, ground, with carbide insert

    Image

    Solid centres, Mount MK 2, DIN 806, half point, ground, with carbide insert

    Half point, with carbide insert.

    Designs with concentricity of 0.003 mm or higher are available on request.

    Features

    • Solid centres are hardened and ground

    Advantages

    • High wear resistance thanks to tool steel / carbide insert
    • High load capacity and rigidity since tips are one piece

    Field of application

    • For counter-clamping workpieces on lathes with tailstock bearing and grinding machines.

    Notes

    • DIN 806, half point, ground
    • With carbide insert

Objects per page